Sigma SIGMACOVER630 epoxy paint product specification No. 7430 warehouse has a large stock, welcome to inquire. SIGMACOVER 630 (SIGMA MULTIMASTIC / SIGMACOVER ST) About 630 two-component epoxy paint, high build polyamine cured surface tolerant epoxy primer / finish PRINCIPAL CHARACTERISTICS - steel surface treatment requires lower - especially suitable for dry cargo , deck, hull or repair of ballast tanks paint - Universal epoxy intermediate coat or topcoat, used as a protective coating is exposed to the continent and the ocean-atmosphere system in the steel and concrete structures - with a variety of old coatings with the use of - the vast majority can paint recoating - excellent rust resistance - resistant to chemical splashes - good toughness color and luster green, gray, red, brown, black and aluminum color - semigloss basic data (20 ℃) (1 g / cm 3 = 8.25 lbs / gallon, 1 m 2 / liter = 40.7 ft 2 / US gallon) the proportion of 1.4 g / cm 3 volume solids content of 83% ± 2% Volatile organic compounds (VOC): maximum 166 g / kg (according to 1999/13 / EC, SED standard) Maximum 232 g / liter (about 1.9 lb / gal) Recommended dry film thickness of 60-100 microns for Brush / Roller 125-200 microns for airless spray Theoretical spreading rate 6.6 m 2 / liter, 125 microns thick; 4.1 m 2 / liter, 200 microns thick dry time 6 hours Recoat Min: see table * Maximum: see table * Fully cured 7 days (Content Data ) Storage valid for at least 12 months (cool and dry place) Recommended base - for exposure to the atmosphere: status and temperature y Steel: sandblasting to ISO standard Sa2.5 level, you can obtain excellent corrosion effect y steel: spray sand clean up ISO standard Sa2 level or power tool cleaning to clean up ISO standard St2 level, you can get a good anti-corrosion effect y Shopprimed steel: Processing Standards Pt3 level of SPSS